5 Axis Drilling and Filling Machine
The BHF-502 is a five-axis machine that both drills and fills, and this clip shows the drilling pass on an oval brush block: the hole pattern runs in an arc across the face, following the shape of the block rather than sitting in a rectangular grid.
Holes can be drilled from 1.0 mm to 8.0 mm in diameter and from 0 to 12 mm deep, and both the drilling and the filling cycles run at 3 to 5 holes per second. Travel is 500 x 200 mm in X and Y, with 360 degree rotation on Z, 180 mm on H and 90 degrees on the S axis. That range is what lets the head reach across and around an oval body. Up to 8,000 hole positions are stored per design.
The bristle container takes a single colour or two, so the same machine drills the block and then fills it without a second setup. It runs on three-phase 380 V or 220 V, measures 1430 x 1100 x 1700 mm and weighs around 600 kg.
