2 Axis Filling Machine
What matters on a filling machine is what comes off it: tufts standing at an even height, rows running straight, and no block where a hole has been missed or filled twice. This clip shows a finished block on a BHF-T20 in exactly those terms.
The red block in the foreground is already filled with white bristle and the rows run true across the face. Getting that result is mostly a matter of setting the machine up before the run: the hand-wheels on the frame bring the filling head over the block, and once height and depth are set the two-position table carries the work past the head without further adjustment.
Holes from 2 mm to 10 mm can be filled, in anchor mode or staple mode, in single or double colour, at 240 to 360 holes per minute, with up to 36,000 positions stored per design. The machine runs on three-phase 380 V at about 2.6 kW, measures 1050 x 950 x 1750 mm and weighs around 600 kg.
