2 Axis Drilling Machine

The BHF-209 is a two-axis drilling machine aimed at flat brushes, and in particular at long bodies where the hole rows have to run the whole length of the block.

The working area is 180 x 180 mm. Holes from 2 mm to 10 mm can be drilled at 360 to 420 holes per minute, and up to 36,000 positions are stored per design. Brush blocks may be plastic or wooden, and both axes are servo driven.

The video shows a long wooden block sitting in a linear fixture that supports it along its entire length, with the single spindle working above it and the vacuum line running behind the head. Supporting the block end to end is what stops a long flat body from springing while it is drilled, and it is the reason the same machine handles both short hand brushes and long flat stock. The set runs on three-phase 380 V at about 2.6 kW, measures 1500 x 900 x 1850 mm and weighs around 600 kg.

Contact
97danny@gmail.com