3 Axis Drilling and Filling Machine for Hairbrush

The BHF-311 puts drilling and filling on one frame as two working stations, so a hair-brush block is drilled at one end of the machine and filled at the other without being taken off and re-clamped somewhere else.

The working area is 250 x 250 mm with 360 degree rotation on the Z axis. Holes from 2 mm to 6 mm can be machined, filament up to 250 mm can be run in staple mode, and the head works at 240 to 360 holes per minute. Up to 36,000 positions are stored per design, and single or double colour bristle can be fed from the container. Blocks may be plastic or wooden.

The video shows the two station groups on the shared aluminium frame, with the main drive motor between them and the extraction ducting on the left. The machine is servo driven, runs on three-phase 380 V at about 3.5 kW, measures 1600 x 1450 x 1800 mm and weighs around 800 kg.

Contact
97danny@gmail.com