2 Axis Tufting Machine for Small Brush

The BHF-B2 handles the small end of the brush range: cosmetic brushes, detail brushes, small hand brushes and similar parts where the block is only a few centimetres across and the hole spacing has to hold to a fraction of a millimetre.

Two working positions sit on the indexing table, so while one small block is being tufted the operator can swap the finished one for a bare block at the second station and the head never has to wait. Holes from 2 mm to 10 mm can be filled at 360 to 420 holes per minute, and up to 36,000 positions are stored per design, which is far more than a small brush needs.

In the video the two clamps are holding small blocks side by side under the head, with the grey filament bundles standing in the foreground ready to be loaded. The machine is servo driven, runs on three-phase 380 V at about 2.6 kW and measures 1750 x 1430 x 1900 mm.

Contact
97danny@gmail.com