Tufting Machine
The BHF-380A combines drilling and tufting in a single three-axis machine, aimed at hair brushes and similar parts where both the hole pattern and the bristle direction have to come out right.
The working area is 500 x 250 mm with 360 degree rotation on the Z axis. Holes from 2 mm to 10 mm can be drilled, and filament up to 250 mm in length can be tufted in anchor mode or staple mode, in single or double colour. Production speed is 240 to 360 holes per minute and up to 36,000 positions are stored per design. PP, PET and nylon filament can all be run, and the blocks may be plastic or wooden.
Because drilling and tufting sit on the same frame, a block goes from bare plastic to finished bristles without being unloaded, and the machine keeps working while blocks are changed at the table. The video shows the two servo-driven axes and the filament canister feeding the head. It runs on three-phase 380 V at about 3.5 kW and weighs around 800 kg.
