4 Axis Tufting Machine

The BHF-411T is a four-axis tufting machine for driving bristles into brush blocks. Anchor mode and staple mode are both available, and the S axis rotates a full 360 degrees, which is what makes concentric and radial bristle patterns practical.

The working area is 200 x 200 mm with 360 degree rotation on S and 30 degrees of tilt on Z. Hole diameter ranges from 2 mm to 10 mm, maximum filament length is 250 mm, and the head tufts at 240 to 360 holes per minute. Both single-colour and double-colour work are supported, and PP, PET and nylon filament can all be run. Up to 36,000 positions are stored per design.

The video shows a black plastic brush block being tufted along a series of concentric oval rings, with the trimmed filament ends visible on the work table. The machine runs on three-phase 380 V, draws about 2.6 kW and measures 1600 x 1450 x 1910 mm at around 800 kg.

Contact
97danny@gmail.com