Industrial Toothbrush Machine

The BHF-103 is a single-head machine that drills and tufts in one setup, aimed at toothbrush handles and other small brush bodies. Because drilling and tufting are handled on the same fixture, the block does not have to be moved between two machines.

Hole diameter is adjustable from 2 mm to 10 mm and filament up to 250 mm in length can be used, in either single or double colour. The head runs at 240 to 360 holes per minute and the controller stores up to 36,000 positions for each design.

The machine is servo driven and runs on three-phase 380 V, drawing about 2.6 kW. It measures 1250 x 1200 x 1700 mm and weighs around 600 kg. The video shows the head working over an aluminium linear table on a small brush block, with the operator pendant at the front for manual jogging and start and stop control.

Contact
97danny@gmail.com