Pool Cleaning Brush Making Machine
The BHF-180P is a dedicated machine for producing the plastic bodies of pool cleaning brushes. It drills the bristle holes across the brush body under programmable control, and the multi-axis head lets it work on flat, curved and angled surfaces without re-clamping the part.
Positioning is handled by a three-axis gantry with X, Y and H travel of 600 x 320 x 200 mm, plus a swivel of 35 degrees on the S axis and 20 degrees on the Z axis. Hole diameter is adjustable from 1.0 mm to 8.0 mm and drilling depth from 0 to 12 mm, at a cycle rate of 4 to 7 holes per second. The controller can store up to 10,000 hole positions, so a brush pattern is programmed once and recalled for every following batch.
The machine is supplied in its own safety enclosure with clear guards, and all parameters are set on the touchscreen control cabinet at the side of the frame. It runs on three-phase 380 V power, measures 2100 x 1650 x 1850 mm and weighs 750 kg. The video above shows the drilling cycle on blue pool-brush bodies in our workshop.
