5 Axis Drilling and Tufting Machine for Steel Wire
The BHF-510 is the five-axis machine we build for brushes with a long handle, and this clip shows why the extra X travel matters: four long-handled bodies are lined up in the fixtures at once, two already bored and one filled with stiff dark bristle.
The working area is 600 x 200 x 100 mm with 30 degrees of tilt on both Z and S, which is what lets the head reach the far end of a long body without the block being re-set. The machine both drills and tufts, in anchor mode or staple mode, in single or double colour. Holes run from 2 mm to 10 mm, filament up to 250 mm, and the machine is servo driven.
Seeing a drilled body and a finished one side by side in the same shot is the clearest way to explain the two passes: first the hole array is bored across the face, then the same fixture is filled. It runs on three-phase 380 V at about 2.6 kW and measures 1650 x 1450 x 1800 mm.
