Tufting Machine
This clip shows the BHF-380A working on red brushes, and the finished piece standing at the right of the frame is a cylindrical roller brush rather than a flat one. That is what the 360 degree rotation on the Z axis is for: the work turns while the head moves along it, so a ring of tufts can be placed right around a body instead of only across a flat face.
The working area is 500 x 250 mm with full 360 degree rotation on Z. The machine both drills and tufts, so a roller body can be bored and filled on the same fixture, in anchor mode or staple mode, in single or double colour. Holes run from 2 mm to 10 mm, filament up to 250 mm, at 240 to 360 holes per minute, with up to 36,000 positions stored per design.
PP, PET and nylon filament can all be run, blocks may be plastic or wooden, and the machine is servo driven. It runs on three-phase 380 V at about 3.5 kW, measures 1650 x 1500 x 1950 mm and weighs around 800 kg.
