Contact person : Mr. DANNY (Owner)
Contact number : +86-020-66870608
Zip code : 510730
steel wire brush machine is a 5 axis drilling and filling machine special for steel wire brush, it works the steel wire by coil, the machine cut the steel wire by itself, The operator manually loads the virgin blocks onto the machine and enables the working cycle. When the cycle is over, the operator removes the filled block and then moves the drilled block from the drilling station to the filling station, and places a virgin block into the drilling station, during the operating, the machine no need to stop, it would run automatic.
◪ Full automatic, no need to stop the machine even changing the virgin blocks.
◪ Working the steel wire by coil, the machine cut the steel wire by itself.
◪ easy to change design.
Axis | 4-7 axis |
Function | Drilling & Filling |
Filling mode | Staples mode |
Standard Working Area | X*Y = 500mm*200mm |
Material of filaments | Steel wire |
Maximum length(standard) | 90mm |
Diameter of wire | 0.3-0.6mm |
Quantity of wire per hole | Less than 12 pieces |
Diameter of holes | 3mm-4mm |
Production speed | 150-180 holes/minute |
Material of brush blocks | Plastic, wooden |
Motor | Servo motors |
Quantity of designs | Maximum 36000 holes |
Gross Weight | Around 1500KGS |
Power Supply | Three phase 380V, 50-60HZ |
Power consumption (kW) | 3.5 |
Dimensions of machine (l x p x h, mm) | 2200 * 3500 * 2150 |
Dimensions of power box (l x p x h, mm) | 580 * 660 * 1500 |
Copyright 2017 GUANGZHOU YITONG NC CO LTD. | All Rights Reserved Design by www.1brush.com